Category
-
exida Introduces New IEC 62443 Cyber Templates
Apr 20, 2020[vc_row][vc_column][vc_row_inner][vc_column_inner][vc_column_text] exida is excited to introduce a new set of templates for common security documents that are normally created during product development. These templates are designed to reduced the time of upgrading development processes to be IEC 62443-4-1 compliant. The following templates are included: Configuration Management Plan Security Requirements Specification Security Test Plan Security User […]
-
Which Measure (Rationalized or Annunciated) is More Important?
Apr 14, 2020[:en][vc_row][vc_column][vc_column_text]Get your priorities (distribution) straight A very common question is posed during alarm management training. Does the recommended alarm priority distribution of ~5% / ~15% / ~80% for high / medium / low priority alarms apply to the rationalized alarm priority distribution (as configured in the control system) or to the annunciatedalarm priority distribution (those […]
-
exida Launches Self-Paced Introductory IEC 61508 Online Course for Software Developers
Apr 06, 2020[vc_row][vc_column][vc_row_inner][vc_column_inner][vc_column_text] The global leader in functional safety certification services for the process industries, exida, has launched the self-paced training course FSE 212 – IEC 61508 – An Introduction to Functional Safety for Software Developers. The IEC 61508 standard for functional safety of electrical / electronic and programmable electronic systems, explains the concepts of safety integrity […]
-
Back to Basics: Failure Rates – λD
Apr 02, 2020[:en][vc_row][vc_column][vc_column_text] The Greek symbol λD represents dangerous failure rates in functional safety, usually expressed in the unit of measurement of FITs, and can be determined through FMEDAs. (FITs (λ) are failures per billion hours, expressed by 10-9 hours). λD is the number of dangerous failures per unit time for a piece of equipment. This would be a time when the failure […]
-
The Benefits of exida’s Site Safety Index (SSI)
Nov 21, 2019[:en][vc_row][vc_column][vc_column_text]New reports out now are claiming that an aging, failed elbow pipe appears to be the initial cause of a June 21 fire and subsequent explosions that injured five people at the largest oil refinery on the East Coast, federal investigators said. The U.S. Chemical Safety and Hazard Investigation Board released a preliminary factual findings […]
-
Back to Basics 17 – PFH (Probability of Failure on Demand per Hour)
Nov 19, 2019[:en][vc_row][vc_column][vc_column_text]PFH (The Probability of Failure on Demand per Hour) is the probability that a system will fail dangerously, and not be able to perform its safety function when required. PFH can be determined as a probability or maximum probability over a time period of an hour. IEC 61508 and IEC 61511 use PFH as the system metric upon which […]